Rooms stay soldHotel roofing · San Antonio, TX

Hotel roofing in San Antonio, without a single comped room.

Leak response, repairs and phased replacements for hotels, resorts, conference centers and event venues, from the River Walk to the interstate corridors.

  • 24/7Leak line,
    live person
  • 0Rooms taken
    out of order
  • 4 hrOn site for
    active leaks

The short answer

Who repairs and replaces hotel roofs in San Antonio?

CRSA is a San Antonio commercial roofing contractor for hotels, resorts, conference centers and event venues. We repair, coat and replace TPO, PVC, modified bitumen, metal and tile roofs across Bexar and surrounding counties, phase work around occupancy and events, keep noise away from guest floors and answer a live 24/7 leak line.

Reviewed by our project team, hospitality projects

Hospitality buildings we roof (building types)

  • Full-service hotels
  • Select-service hotels
  • Extended-stay hotels
  • Resorts
  • Conference centers
  • Event venues
  • Hotel restaurants

Why hotel engineers call us

In a hotel, a roof leak becomes a guest complaint in minutes. These habits keep reviews about the room, not the ceiling.

  • 24/7live leak line
  • Freeroof assessments
  • 5 yrworkmanship warranty
  • Quiet near guest floors

    No loud work before 10 am or after 6 pm above guest rooms.

  • Around occupancy and events

    Big work scheduled for low-occupancy weeks, never during Fiesta or major conventions.

  • Rooms back in service fast

    Leaks over guest rooms get a same-day dry-in so housekeeping can turn the room.

  • Kitchen and laundry exhaust

    PVC zones and grease containment over restaurant and laundry vents.

  • Brand and owner reporting

    Photo reports and roof plans for owners, management companies and brand standards.

  • Invisible to guests

    Crews use service entrances, stay out of public areas and keep the drive clear.

Roof systems for hotels

Pick a system to see how it fits a hotel roof over sold rooms.

  1. TPO membrane, heat-welded seams
  2. Cover board
  3. Polyiso insulation, about R-25
  4. Vapor retarder
  5. Steel or concrete deck

Our usual pick for hotel tower roofs

TPO membrane

TPO roofing details

Service life
20–30 yrs
Installed cost
$9.50–$14 / sq ft
  • Service life
  • Upfront value
  • Quiet install over guests
  • Grease and traffic resistance

Why it fits: White, welded with hot air and quiet to install over guest floors.

Watch out: Needs PVC near kitchen exhaust and pads around HVAC units.

  1. PVC membrane, heat-welded seams
  2. High-density cover board
  3. Tapered polyiso insulation
  4. Vapor retarder
  5. Deck

Over restaurants and laundries

PVC membrane

PVC roofing details

Service life
25–30 yrs
Installed cost
$10.50–$16 / sq ft
  • Service life
  • Upfront value
  • Quiet install over guests
  • Grease and traffic resistance

Why it fits: Resists grease and laundry lint residue around exhaust fans.

Watch out: Higher cost; usually used in zones.

  1. Silicone top coat
  2. Base coat, reinforced seams
  3. Cleaned, primed existing roof
  4. Existing insulation (dry)
  5. Existing deck

Quietest way to extend a roof

Silicone restoration

Silicone roof coating details

Service life
10–15 yrs added
Installed cost
$3–$7.50 / sq ft
  • Service life
  • Upfront value
  • Quiet install over guests
  • Grease and traffic resistance

Why it fits: No tear-off above guests and very little noise.

Watch out: Only on dry roofs; confirmed with a moisture scan.

  1. Clay or concrete tile
  2. Battens
  3. Two-ply underlayment
  4. Solid deck

For Spanish-style resorts and inns

Clay & concrete tile

Tile roofing details

Service life
50+ yrs
Installed cost
$9–$18 / sq ft
  • Service life
  • Upfront value
  • Quiet install over guests
  • Grease and traffic resistance

Why it fits: Keeps the Hill Country and Mission look many San Antonio properties are built around.

Watch out: Heavy and cracks under foot; repairs need matched tile.

  1. Standing-seam metal panels
  2. Clips and high-temp underlayment
  3. Insulation and thermal spacers
  4. Structural deck or purlins

For porte-cocheres and resort buildings

Standing-seam metal

Standing-seam metal roofing details

Service life
40–60 yrs
Installed cost
$12–$20 / sq ft
  • Service life
  • Upfront value
  • Quiet install over guests
  • Grease and traffic resistance

Why it fits: Long-life metal on entrance canopies, villas and event pavilions.

Watch out: Needs slope; not for flat tower roofs.

How we work without disturbing guests

Every hotel project follows the same six steps, planned with your general manager and chief engineer.

  1. 1

    Map the roof to the rooms

    Guest rooms, suites, ballrooms and kitchens marked under every roof area.

  2. 2

    Check the calendar

    Occupancy forecasts, conventions, weddings and city events blocked out.

  3. 3

    Plan access

    Service entrances, crane spots and staging away from the lobby and drive.

  4. 4

    Protect, then open

    Rooms below open zones protected or blocked only if truly needed.

  5. 5

    Work quiet hours

    Loud work mid-day, quiet detail work early and late, nothing at night.

  6. 6

    Close out

    Warranty, roof map, photos and a maintenance plan for the engineering team.

A typical day on a hotel roof

Planned aroundyour guests

  • 10 am – 12 pmCrane lifts after check-out traffic
  • 12 pm – 4 pmTear-off and installation over cleared zones
  • 4 pm – 6 pmQuiet welding and closing every zone
  • 6 pm – 10 amQuiet hours for guests; leak calls only

Who we coordinate with at your hotel

Six roles feel a hotel roof project. Each one gets a named contact.

  • Role 01

    General manager

    Schedule around occupancy and events.

    Named contact on our side
  • Role 02

    Chief engineer

    Roof access, equipment and utilities.

    Named contact on our side
  • Role 03

    Front desk

    Rooms out of order and guest questions.

    Named contact on our side
  • Role 04

    Housekeeping

    Room turnovers after leak repairs.

    Named contact on our side
  • Role 05

    Events and catering

    Ballroom and wedding schedules.

    Named contact on our side
  • Role 06

    Owner or asset manager

    Budget, brand standards and capital plan.

    Named contact on our side

Hotel roofing costs and budgets

Sample 2026 ranges for the San Antonio area. Hotel work adds quiet-hour scheduling and access planning, shown separately.

  • Leak repair$450 – $3,500per visit, most hotel calls
  • Restoration coating$3 – $7.50per sq ft, adds 10–15 years
  • TPO replacement$9.50 – $14per sq ft, tear-off and R-25
  • PVC exhaust zones$14 – $20per sq ft of zone

Hotel line items we show separately

  • Quiet-hour scheduling+5–12%
  • Crane and street permits$4k – $20k
  • Pool deck and amenity detailsQuoted per area
  • Rooms out of orderAvoided where possible

Quick budget check

Hotel conditions
Budget range Sample 2026 ranges, not a quote.
Get a fixed written price
  • 01

    Use the slow season

    Late summer and January weeks are usually the easiest to work around.

  • 02

    Fix exhaust zones first

    Kitchen and laundry vents cause most repeat hotel leaks.

  • 03

    Plan with the PIP

    Line roof work up with any brand renovation plan.

Numbers that shape a hotel roof

  • 4 hrtypical on-site time for a leak over guest rooms
  • 10 amearliest loud work above guest floors
  • 50°Fcooler surface on a white roof in July
  • 2roof layers allowed before a tear-off

The front desk hears about a leak before the engineer does. Give them our number too.

Crew rule of thumb · hotel roofs

Hotel districts we cover

Drive times are from downtown San Antonio. The River Walk, airport hotels and interstate corridors are on our routes daily.

LOOP 1604LOOP 410I-10I-35281I-3790DowntownMedical CenterStone OakNorth CentralAlamo RanchWestover HillsHelotesBoerneLive Oak & ConverseSchertz & CiboloNew BraunfelsBrooks & SouthsideSeguin

Pick an areaDrive times from downtown San Antonio.

Hotel roofing questions

GMs and chief engineers ask us these first. Something else? Call a project manager.

01Can you replace a hotel roof without taking rooms out of order?

Usually. Zones are planned around occupancy, loud work stays mid-day and every zone closes daily.

02How fast can you fix a leak over a guest room?

A crew is usually on site within 4 hours and dries the leak in the same day so the room can be turned.

03What causes leaks on hotel roofs?

Most come from HVAC curbs, kitchen and laundry exhaust, and pool equipment penetrations.

04How much does hotel roof repair cost?

In 2026 most repairs run $450 to $3,500 per visit; TPO replacement about $9.50 to $14 per square foot.

05Do you work around events and conventions?

Yes. Big events and peak weeks are blocked out of the schedule.

06Do you roof resorts and event venues?

Yes, including tile, metal and flat roofs on villas, ballrooms and pavilions.

07What hospitality roofing warranties are available?

Manufacturer warranties up to 20 to 30 years depending on the system, plus our 5-year workmanship warranty.

08Do you handle hail claims for hotels?

Yes. We document the roof for the insurer and make temporary repairs right away.

Plan your hotel’s roof work

Tell us about the property. A project manager calls back within 2 business hours, or right away for an active leak.

  • Roof walk, moisture scan and report at no charge
  • Repair, coat and replace options with fixed prices
  • A schedule built around occupancy
Water coming in now?(210) 384-6843
01 Your property

What kind of building?

02 The roof

What do you need?

Anything we should plan around? optional

03 How we reach you

Used only to answer your request. Privacy.

Request received.

A project manager will call you within 2 business hours. Need us sooner? (210) 384-6843